Paper prints

PiaChit Chat

Dry flowers apparently aren’t my thing, they look very dull and broken, some leaves might be useful. I don’t know if I went overboard squishing them real hard with clamps on the books?

I do still plan to try some garden printing, when time allows. There must be stuff out there that I can use even late in the season! Maybe I can do it on pieces of cloth that I plan to plant dye, if I use acrylics, they shouldn’t wash off no matter what I put the material through afterwards, at least that’s the deal when I get it on my clothes…. (does anyone paint and manage to look pretty throughout?) I wish I had some more fluid paints than the ones I have, guess I’ll have to invest in Golden acrylics next time.

In the meantime I saw those posts on plant dyeing on paper, which I just had to give a go although late in the season. Next summer and flowers and new dyebed (which hubby at the moment has decided to till for me as a first prep! Yay him!)

First session went quite well although I had no idea how to “steam” the paper, nor how to best keep the sandwiches tight and not floating apart. So I’ll be getting some alder leaves and some coreopsis from the freezer, and hey! How about all those dry homegrown weld and Dyer’s chamomile I collected!? Any Woad leaves left out there I wonder?

Time to get a bit scientific about it. Two pair of sheets soaked in vinegar, two in aluminium acetate. Alder leaves, more yellow birch leaves and Liquidambar styraciflua. Another sandwich, same mordants, strawberry leaves green and yellow, sage, celandine. In between the 2 sets, a layer of frozen coreopsis tinctoria and blue columbine flowers.

Then there’s the consideration of temps. Will a too high temp give dull prints? How low can you go and still get steam? I started with 150 C because 100 didn’t seem to get steamy. 120 doesn’t seem to quite work either, no visible steam anyway.

I’m showing both front and back of some sheets, since they could be used either way.

Unfortunately at some point in the drying process, I lost track of which 4 sheets were aluminium soaked instead of vinegar, AND forgot in which way they were different. I could identify them by which first sheet has the grate imprint from the oven, but after a 3 day break I also forgot which batch was on the bottom. DUH. Scatterbrain.

I’m happy enough with these results that I’m going to keep playing with paper and plants. Test which seasons give the best results and see if I can find any info on it. Some also say use “dead” leaves collected from the ground, some even use older leaves and soak them first. Hmmmm – I wonder about the above pressed flowers and stuff now?!

A short search gave me:

Cassandra Tondro on eco printing with a recipe (backwards) for paper steaming

The natural surface – great forum

Dip and stain

Threadborne list of plants to use

Next challenge: If I order a new batch of water colour paper, can I resist getting pens and inks and other lovely supplies while I’m at it?! Now that I’m getting a micro painting studio and all….

Fall forage

PiaPlant Dyeing

Just a bit of gathering while walking the dog, to keep me occupied during winter in case I get urges.

In addition to the chestnut hulls I brought home, I also gathered spruce cones from the forest.

AND I found one young alder tree on our property that had produced cones, so I got myself a bag of those too.

I then tried to strip the larch trees, but they were not quite ready to let go of their needles, and those which did mostly ended up on my sweater. Tricky! I’ll get back to them in a week or so.

Then I went foraging websites and ended up ordering this canning device with a thermostat, I’m guessing it’s real good for keeping madder root at it’s proper temp as well! Since the jars will be shut I’m wondering if I could use it for apple sauce too. Not sure if I’ve had actual mordants or acid dye in there, what do y’all think?

Cloths part 3

PiaPÃ¥ dansk

Time for the last set of plant print experiments! I wasn’t really inspired to attempt any nice photography, so I just popped them in the flatbed scanner for you.

Sheet from last batch as well as the “mystery fabric that doesn’t take any colour” (I think we’ll just call it Homer from now on) had a bath in aluminium acetate then some powdered madder root and a handful of dried hollyhock heads, and the sheet, previously dyed brown from longterm exposure to celandine, had a short bath in – well, celandine. Not a lot of improvement, so I wrapped it up with some fern leaves. Nothing much happened for weeks, so I steamed it. And if you squint you might just be able to see a weak fern pattern…. Mostly, what I got was a bunch of brown, mouldy fabrics smelling like a cow’s a*se.

The raspberry leaves did print nicely – from the top side of the leaves only, the fabric covering the back of the leaves have 0 change. And, well, the lupine leaves? yawn…..

I actually think I’m giving up on this. Rose leaves gave me nothing. Alchemilla mollis, nothing.

I may however, decide to try with paper, after reading this blog. Tell me it isn’t cool!

http://wendyfe.wordpress.com/tag/eco-prints-on-paper/

Of course, I’m rapidly running out of leaves, so this will be for another year. Tomorrow I’ll go check if any more of these are still up (and no, I can’t imagine they’ll actually print red)

Liquidambar styraciflua

≈ Leave a Comment

Plantefarvning på stof

Tid til flere eksperimenter inden sæsonen er slut! Lupinblade og bregner rullet ind i bomuld. Forsøgte mig ogsÃ¥ med rosenblade – ingenting skete. Faktisk skete der absolut ingenting med nogen af mine forsøg ved at blot lade stoffet ligge med planter i og holde det fugtigt, sÃ¥ jeg prøvede at dampe/koge et par stykker. Hindbærblade virkede ligesÃ¥ godt som egeblade, men kun fra forsiden. Tørrede stokrosehoveder var derimod forbavsende gode, glæder mig til at farve garn med dem.

Og der sker lige nøjagtig ikke ret meget, ud over at det begynder at stinke efter en måneds tid, så nu tror jeg ærlig talt ikke jeg gider prøve igen lige foreløbig, slet ikke på bomuld i hvert fald.

Winter on the march

PiaChit Chat

After a frosty, beautiful, sunny weekend taste of the season to come, we’re now facing a rainy prenovember this week, temps around 5 C and winds to chill your bones. Weather for crafting, yeah? October has been really mild, but I guess it couldn’t last.

I haven’t been doing anything fibery really. I’ve been busy, and then I’ve been too tired. Next up is plying my “black” shetland, I managed to spin it a lot thinner than the last batch, so now I have to make more plies to match or I’ll never have that sweater.

I did manage to finish one wip though, the new collar on my scratchy sweater.

I unwrapped my last cotton plant print experiments – very disappointing, but more about it later since I did not take advantage of the sun to take pix. I think next year I’ll try to get some silk instead.

We’ve been remodelling the bedroom wardrobes this weekend, now all that remains is reORGANIZING stuff. I just love it when I can fill a few garbage bags with old useless stuff (and get more efficient space for fiber too). I have 5 new shelves instead of a double coat rack – the other 5 I had to let the tall guy have since I made him throw out the mint green shirt his mum once bought him. 😉 I’m determined to have a clutter and dust free bedroom without his piles of whatever just draped across every possible surface. Some training in addition to the shelves will probably be involved in this project, but hope springs eternal… Come summer it’ll be paint the walls and wardrobe doors as well as carpet begone and we’ll have at least one room that’s relatively spiffy and up to date. Ok, I won’t invite any interior design magazines, but it’ll do. My life must be really dull since I can get all excited about cleaning house!!! (oh that promised trip to IKEA for my paint “studio”, when!?)

from ikea.com

And I still have outside stuff to do, small trees that need to be replanted, some baby lilacs need to be dug up, the stable is overdue to have the cobwebs removed and I need fresh gravel in front of the door instead of mud. It’s good to move your body they say. And so much more fun to do real stuff compared to mindless exercise! That said I got inspired by a tv show about the human as a running machine and got some Vibram Five-Fingers on sale. Not exactly the season for trying them out, but I do have issues with landing hard on my heel, instant knee pain when running and just feeling stiff and awkward in normal trainers. Could be just the thing? And they included free socks. 😀

Baby Arthur is now turning into a teenager and has been allowed trips outside to burn some of that energy. Oh, he sleeps so well after exploring the big wide world. He’s learned to use the cat flap, which was one of the requirements, since we have the occasional stray tom, and I want the little one to be able to escape to safety. Right now he’s feeling poorly after his 2nd vaccination, I do hope he perks up soon! I’m soo fed up with sick animals over the last few years.

You seem to need an additional brake, yeah?
No mom, we iz not fightin’!

I came across these nifty images from space, when I was zapping the interwebs, I’m thinking cool stuff could be made from some of these with Photoshop, as backgrounds for something?

ESO/Igor Chekalin

But after I’m done – I will get back on my wooly track I’m sure. Moorit Shetland to be spun (thicker this time), fiber to be dyed.